船舶及海洋工程技术咨询网
www.maotc.com
第一部分
日常用语:Daily English Ⅰ:问候、介绍、告别( Greetings、introductions and farewells)
  1、I’m a fitter (electrician、piper ). 钳工、电工、管子工
  2、He is an inspector(QC). 检验员
  3、Welcome to our shipyard. Ⅱ:致谢、道歉(Gratitude and Apologies)
  1、Do me a favour, please. 请多帮忙
  2、When shall we deliver it? 提交
  3、Please wait a moment.
  4、Will this way take me to the foreign office? 外事办
  5、Right-about-face 向后转 Ⅲ Life in the yard
  1、Have you got used to the life here?
  2、Please hold the handrails well. 请抓好扶手
  3、Please use your intercom.(walkie-talkie)对讲机
  4、How about quality? 质量怎么样?
  5、There’s something wrong with the drawing.
  6、Sorry, It’s my fault. 是我的过错
  7、Don’t worry. That’s easy to deal with.
  8、Let’s start to check some items. 开始验收吧
  9、Are you satisfied with it?
  10、The vibration (temperature、pressure、speed) is normal.
  11、Sorry, it has not been finished yet.
  12、Submission (Delivery) is Okay. 提交(验收)成功 常用句型 Common Patterns
  1、That is an exhaust valve. 排气阀
  2、These are blowers. 鼓风机
  3、There are ten workers in our group.
  4、He is a technician. 技术员
  5、I am a fitter. 钳工
  6、When shall we have a check?
  7、Will you please give me a hand?
振动(温度、压力、速度)是正常
1
船舶及海洋工程技术咨询网
www.maotc.com
第二部分 管子部分
Ⅰ.管子加工后提交用语:Delivery expressions after pipe processing
  1、Which system is this pipe for?
  2、How many pipes are there altogether?
  3、What’s the designed test pressure ? It is 12 kilograms/cm2 设计规定的试验压力是多少? 12 公斤/厘米
  2。
  4、How about the accuracy of this pressure gauge? When did you calibrate it? 这压力表准不准确?什么时候校验的?
  5、Is the owner’s representative here now?船东来了没有?
  6、When will the surveyors be here?验船师什么时候来?
  7、Have your inspectors checked it? Any problems? 你们分厂的检验员看过没有?有什么问题?
  8、The welding is uneven and needs some remedy.焊角尺寸不均匀,需要修补。
  9、There is an air hole here. Please scrape it and have a repair.这里有气孔,需挖掉后再修补。
  10、There is a seizing here. Reweld it please. 这里有咬口,需焊补。
  11、The inside of the pipe needs grinding.管子内部需打磨。
  12、The inside of the pipe needs welding and grinding. 管子内部需补焊打磨。
  13、The inside of the branch pipe needs welding and grinding. 支管内部需补焊打磨。
  14、Please grind it once more.打磨不够,再磨以下。
  15、The seam of the pipe seat is not welded thoroughly and needs welding and grinding. 管座焊缝未焊透,需补焊打磨。
  16、The seam of the reducer connection is not welded thoroughly and needs welding and grinding. 异径接头缝未焊透,需补焊打磨。
  17、The seam of the bend is not welded thoroughly and requires welding and grinding. 定型弯缝未焊透,需补焊打磨。
  18、The welding part is too thin and needs rewelding. 电焊太薄,需补加电焊。
  19、Now I’ll have to go on board. I will have a check this afternoon.现在我有事需上船,下午再来检验。
  20、The pressure test is over. Now decrease the pressure , dismantle the pipe and check the inside of the pipe. 压力试验通过了,把压力放掉,拆开管子,检查管子内部。
  21、What’s to be done after water pressure test? Acid flushing or galvanizing? 水压试验后怎么处理,是酸洗还是镀锌?
  22、These pipes need photoing and inspecting.这些管子需拍片和探伤.
  23、I’ll check the material certificate of the pipe. 我要这管子的材质证书。
  24、I’d like to see the material certificate of the flange. 我要看这法兰的材质证书。
  25、These pipes have been checked and can be stamped.这些管子已通过验收,可以打钢印了。
  26、Is there any leaking here? 这里是否漏水? Ⅱ. 船舶管系提交一般用语 for the delivery of the piping system
  1、先生,麻烦给我看一下缺陷可以吗?Sir, could you show me the defect?
  2、现在可以启动泵吗?May I start the pump now?
  3、我们开始做实验吧 Let’s begin the test.
  4、这个系统没问题吧? Is there any trouble for this system?
  5、压力太低(高) The pressure is too low (high).
  6、温度太低(高) The temperature is too low (high).
  7、流量太小(大) The flow is too little (much).
2
船舶及海洋工程技术咨询网
www.maotc.com

  8、真空度太小 The pressure in the vacuum is too low.
  9、旁通阀关闭 The by-pass valve is closed.
  10、我们到上面(下面、前面、后面)去看看。 Let’s go upward (downward、forward、backward) to have a check.
  11、能否让我叫个翻译来解释一下 Shall I ask an interpreter to explain it to you?
  12、你要看一下图纸吗? Would you like to have a look at the drawing?
  13、这根管子的通径是 1500mm。 The diameter of this pipe is 1500mm.
  14、这个系统的原理没有问题。 The principle of this system is okay.
  15、安装的位置是可以的,便于操作。 The installation position is proper and easy for operation.
  16、我们会按照你的意思改一下 We’ll make a change according to your request.
  17、让我们到隔壁舱室去看一下。 Let’s go to the next hold (space, room, cabin) to have a look.
  18、垫片换新 Renew the washers.
  19、法兰平面贴合不好。The surface of flanges don’t fit well.
  20、管子镀锌 Galvanize the pipes.
  21、管子油漆 Paint the pipes
  22、螺丝扳紧 Tighten the screw.
  23、消防管(压载管 / 日用空气管 / 日用淡水管)密性试验 The tightness test for fire pipes (ballast pipes / service air pipes / service F.W. pipes).
  24、喷淋装置试验。 The test of spraying and flushing equipment. Ⅲ. 船舶管系各系统完整性、密性提交用语 for the completeness and tightness of the piping system.
  1、请把垃圾清除干净 Please clear the rubbish.
  2、请保持良好通风,并且要做气爆测试 Please keep good ventilation and do the gas explosion test.
  3、请把系统的完工图提供给我们 Please provide us with the finished plan of this system.
  4、请把这个穿舱件改成水密的 Please change this penetrating piece into water tight construction.
  5、把这个阀件拆下检查其是否为截止(止回)阀 Please disconnect this valve to see is it is a non-return valve.
  6、这个阀(设备、附件)没有船级社检验钢印,需要补做。 This valve (equipment、accessory) hasn’t been affirmed or stamped by the classification society.
  7、这一支管通径(开的位置,外部涂装)不对,一定要按照图纸施工。 The diameter (opening position ,outer painting) of this branch pipe is not correct. It must be fabricated in accordance with the drawing.
  8、这路管子不应该穿过油舱(水密舱、人形通道、电缆管)的上方,必须改正以防止事故发生。 This pipe must not pass through from above oil tanks (water-tight compartments、 passageways or cables) to prevent any accidents from occurring.
  9、焊接(打磨)太糟糕了 The welding (grinding) is too bad (too poor).
  10、压力表在哪里?安装的位置不合理。 Where’s the pressure gauge? The installation position is not reasonable.
  11、这个箱柜居然没有安装泄放阀。 Why didn’t you fit a drain valve on this tank?
  12、这样布置,对今后操作和维修带来不便。 Such an arrangement is inconvenient to the future operation and maintenance.
  13、设备上的好多附件、接口和控制箱怎么都没有铭牌?一定要补做。 There are not any name plates on so many accessories, connections and control boxes. I want to know why.
  14、请把压力表拆下来检验“O”位。Please remove the pressure gauge to calibrate its “zero” position.
  15、检查期间请停掉泵浦,拆掉升压管。 Please stop the pumps and disconnect the booster pipes during the inspection.
3
船舶及海洋工程技术咨询网
www.maotc.com

  16、这个阀件关不死,请修理或调换。 This valve cannot be closed tightly. Please repair it or have it changed.
  17、管路末端要拆下来并且用水把里面的垃圾冲干净。 Please disconnect the pipe ends and flush it with water.
  18、 这个问题我们将同设计所商议, 并争取尽快给予答复。 We’ll contact with the technology research institute in respect of the technical problem and reply to you as soon as possible.
  19、我们不能按照你的要求将压力泵进该管路,以防止内部的仪表等元件损坏。 We are not allowed to pump the air into this piping, otherwise the inside meters and components will be damaged.
  20、请你继续检验下去,将所有的问题尽量全部提出。 Please go on checking. And we hope you will give us a complete list of defects as soon as possible. Ⅳ.船舶管系各系统效用提交用语:for the effectiveness of the piping system.
  1、我们要重新检查以下有关设备、管路、电缆等安装方面的缺陷。 We’ll examine again the defects in the installation of the following related equipment、pipe lines and cables.
  2、与本设备有关的系统缺陷必须要验收之前全部消除,否则拒绝验收。 All the defects related to this equipment must be eliminated before delivery, or we’ll refuse to accept it.
  3、这些数据与试验大纲(设备说明书)不符,请给予解释 。 These data don’t agree with the test outline (instruction book), please make a reasonable explanation.
  4、铭牌内容的表达不准确,必须表明流向和功用等。 The content of the nameplate is inaccurate and it must indicate clearly direction and function.
  5、对不起,我可以借一下你的手电筒用一用吗? Excuse me, but may I borrow your torch?
  6、请使用我们自己校验过的仪表。Please use the apparatus we have calibrated.
  7、法兰(接头)有泄漏,请紧固。The flange(connection) is leaking. Please have it tightened.
  8、阀件开关太困难,请清除阀杆上的油漆并加润滑剂。 The valve is switched on or off with difficulty. Please clear the paint on the valve stem and add some lubricant.
  9、很抱歉,你们的要求超出了合理的范围,我们不能接受。 Sorry, we can’t accept your unreasonable requests.
  10、管路的安装、完整性和密性已经检验过了,这是报告单。 The installation completeness and tightness of the piping have been inspected already. Here’s the survey report.
  11、我们会按照你方要求尽快修改这些缺陷。 We’ll remedy these defects as soon as possible to satisfy your requirement.
  12、我们会尽力将这些压力表的单位改成“Kgf/cm2”的。 We’ll try to change the measurement unit of the pressure gauge into Kgf/cm
  2.
  13、今天就到此为止,明天继续。 So much for today. Let’s go on tomorrow.
  14、谢谢你的合作,下次再见。 Thank you for your nice cooperation. see you later.
4
船舶及海洋工程技术咨询网
www.maotc.com
附录 1 Appendix 1
通用词汇 Vocabulary for general purpose
  1、百 hundred
  3、万 ten thousand
  5、亿 hundred million
  1、星期一
  3、星期三
  5、星期五
  7、星期日 Monday Wednesday Friday Sunday
  2、千 thousand
  4、百万 million
  6、十亿 billion
  2、星期二 Tuesday
  4、星期四 Thursday
  6、星期六 Saturday

  1、春季 Spring
  3、秋季 Autumn
  1、一月 January
  3、三月 March
  5、五月 May
  7、七月 July
  9、九月 September
  11、十一月 November
  1、小时 hour
  1、前天 the day before yesterday
  1、sunny 晴、阳光明媚得
  4、windy 有风的
  7、overcast 阴天
  10、cool 凉爽
  13、shower 阵雨
  16、temperature 温度
  19、barometer 气压表
  1、director 厂长、主任、所长
  3、engineer 工程师
  5、division manager 科长
  7、foreman 工长、领班
  8、 ship owner 船东
  11、site supervisor 现场造船师
  13、fitter 钳工

  2、夏季 Summer
  4、冬季 Winter
  2、二月 February
  4、四月 April
  6、六月 June
  8、八月 August
  10、十月 October
  12、十二月 December
  2、分钟 minute
  3、秒 second

  2、后天 the day after tomorrow
  2、rainy 下雨的
  5、foggy 有雾的
  8、hot 炎热的
  11、cold 寒冷
  14、storm 暴风雨
  17、centigrade 摄氏
  3、cloudy 多云的
  6、snowy 下雪的
  9、warm 暖和的
  12、humid 潮湿
  15、typhoon 台风
  18、thermometer 温度表

  2、chief engineer 总工程师、轮机长
  4、technician 技术员
  6、head of group 组长
  8、inspector 检验员
  9、 register 验船师 (机)
  12、service engineer 服务商
  14、electrician 电工
  10、 surveyor 验船师 (船)
  15、painter 油漆工
5
船舶及海洋工程技术咨询网
www.maotc.com
附录 2 Appendix 2
Ⅰ.技术术语 Technical Terms
  1、pump 泵 ①Supply pump 供给泵 ③circulating pump 循环泵 ⑤ballast pump 压载水泵
  1、tank ①drain tank 泄放柜 ③settling tank 沉淀柜 ⑤circulating tank 循环柜 ⑦buffer tank 缓冲柜 ⑨Collecting tank 收集柜
  2、water ①sea water (S.W.) 海水 ③operating water 工作水 ⑤washing water 冲洗水 ⑦feed water 给水 ⑨bilge water 舱
  •  
 

相关内容

管子轮机英语

   船舶及海洋工程技术咨询网 www.maotc.com 第一部分 日常用语:Daily English Ⅰ:问候、介绍、告别( Greetings、introductions and farewells) 1、I’m a fitter (electrician、piper ). 钳工、电工、管子工 2、He is an inspector(QC). 检验员 3、Welcome to our shipyard. Ⅱ:致谢、道歉(Gratitude and Apologies) 1、Do me a ...

轮机英语

   第一部分 日常用语: 日常用语:Daily English 问候、 Ⅰ:问候、介绍、告别( Greetings、introductions and farewells) 问候 介绍、告别( 、 ) 1、I’m a fitter (electrician、piper ). 钳工、电工、管子工 、 钳工、电工、 、 2、He is an inspector(QC). 检验员 、 3、Welcome to our shipyard. 、 致谢、 Ⅱ:致谢、道歉(Gratitude and Apol ...

轮机英语

   第一部分 日常用语:Daily English Ⅰ:问候、介绍、告别( Greetings、introductions and farewells) 1、I’m a fitter (electrician、piper ). 钳工、电工、管子工 2、He is an inspector(QC). 检验员 3、Welcome to our shipyard. Ⅱ:致谢、道歉(Gratitude and Apologies) 1、Do me a favour, please. 请多帮忙 2、Whe ...

轮机英语

   1、In the two stroke diesel engine, it is designed so that the oil impingement is timed to proceed only on the piston ring belt during . A. compression stroke B. suction stroke C. expansion stroke D. exhaust stroke 2、In a four stroke engine, whic ...

轮机英语6

   Quiz 6 for L11& L 12 Part I Multiple Choice Part II Translation A. Sentence B. Phrases Part I Multiple Choice 1.In conventional systems, the injection pressure , while it’s in common rail diesel engines. A. fluctuates with the engine speed to s ...

轮机英语单词

   A 单词及词组 Abrasive Absolute Additive Adjacent Accommodation Actuate Actuator Aeration Aerobic Aftermost Agitation Aid Airborne Anchorage Ancillary Angular Annal Anneal Alkalinity Alleyway Alloy Alongside alternator Amend Amplifier Annex Annular Apert ...

轮机英语评估

   轮机英语听力与会话三版口述和问答题答案 第一章 口述 1.The engine room is the heart of a ship. It is generally located at the stern near the ship bottom. In the engine room, there are a lot of machinery and systems, such as the main engine, the generater engine, boilers, pum ...

船舶轮机英语

   中国海员之家网站航海资料系列 船舶轮机英语 第 1 页 第一部分 日常用语:DailyEnglish Ⅰ:问候,介绍,告别( Greetings,introductionsandfarewells) 1,I'mafitter(electrician,piper). 钳工,电工,管子工 2,Heisan inspector(QC). 检验员 3,Welcometoourshipyard. Ⅱ:致谢,道歉(GratitudeandApologies) 1,Domeafavour,please. ...

船舶轮机英语

   第一部分 日常用语:Daily English Ⅰ:问候、介绍、告别( Greetings、introductions and farewells) 1、I’m a fitter (electrician、piper ). 钳工、电工 、管子工 2、He is an inspector(QC). 检验员 3、Welcome to our shipyard. Ⅱ:致谢、道歉(Gratitude and Apologies) 1、Do me a favour, please. 请多帮忙 2、Wh ...

轮机英语词汇

   是过后冷却器吗? 农夫 19:34:06 后置 农夫 19:34:16 下面的呢、 乱了的琴弦 19:34:35 排气总管吗? 农夫 19:35:22 Impeller 乱了的琴弦 19:35:37 叶轮 农夫 19:35:43 Exhaust diffuser 农夫 19:36:45 cam followers 乱了的琴弦 19:36:51 Exhaust diffuser 排气扩压器 农夫 19:37:04 乱了的琴弦 19:37:35 cam followers 凸轮什么的? 乱了的琴 ...

热门内容

高一英语(新世纪)-Unit5-知识点梳理

   学而思教育学习改变命运 思考成就未来! 高考网 www.gaokao.com Unit 5 1. conductor (n.) 乐队指挥; (公共汽车)售票员; (火车)列车员;导(电)体 the conductor of an orchestra 乐队指挥 a bus conductor 公共汽车售票员 semi conductor 半导体 Copper is a good conductor of electricity. 铜是良导体。 conduct (n.) 行为,操行 a bad ...

高中英语单词与初中英语单词(汇总)

   高中英语单词与初中英语单词(汇总) 高中英语单词与初中英语单词(汇总) 高中英语单词表 dying a.垂死的,临终的 dye vt.&vi.染,染色 n.染料,染色 duty n.责任,义务;职责,职务;税,关税 dusty a.多灰尘的,灰蒙蒙的;粉末状的;灰色的 dustbin n.垃圾箱 dust n.尘土;粉末 vt.擦净,除尘;撒(粉末等) during prep.在...的整个期间,在..期间的某个时候 dumpling n.一种食品(用肉和蔬菜作馅,蒸熟来吃) dul ...

英语写作讲座 开头段写法

   1. 对立观点法 2. 社会调查法 3. 故事开头法 4. 设问开头法 5. 实事(背景)开头法 实事(背景) The government should spend money on promoting a healthy lifestyle to prevent illness rather than on the treatment of people who are already ill. To what extent do you agree or disagree? 词汇掌握 ...

高考英语时态语态练习

   3eud 教育网 http://www.3edu.net 50 多万教学资源,完全免费,无须注册,天天更新! 时态语态练习 1. Oh, dear. I forgot the air tickets. You something. A. have left B. are always leaving C. are leaving D. always left 2. I so busily recently that I no time to help you with your math. ...

陕旅版小学英语六年级下册lesson 11 I love animals说课稿

   小学英语六年级下册 lesson 11 I love animals 说课稿 一、说教材 1、教材内容 本课主要谈论的是关于动物的话题。 要求学生对身边熟悉的动物 能会读,会写,能灵活运用句型 I can see something. 2、教材地位 本单元所学知识点在整个小学阶段以及学英语初期都是非常重 要的,为初中阶段该知识点的深入学习打下了基础。 3、教学重难点 对句型 I can see something 的掌握。 二、说目标 教学目标 A 知识目标: 理解会说会写会用动物的名称 e ...